Cd/Usb/Ipod/Aux - Pioneer DEH-X7800BHS Owner's Manual

Alert history
(Only for DEH-X8800BHS/X7800BHS)
1
While receiving an emergency announcement, press
The last four items that have been received appear.
2
Turn the M.C. dial to select one of the items, then press to confirm.
The detail of the selected item appears.
NOTE
[/TEST/] appears at the beginning of an item if it was a test message.
To delete an alert history
1
Press and hold the M.C. dial in step 2 above.
2
Turn the M.C. dial to select [DELETE YES], then press to confirm.

CD/USB/iPod/AUX

NOTE
CD function is not available for MVH-X580BS.
Playing back
Disconnect headphones from the device before connecting it to the unit.
Disc loading slot*
M.C. (multi-control) dial
SRC (source)/OFF
* Not equipped for MVH-X580BS
8
En
.
(eject)*
USB port
AUX input jack (3.5 mm stereo jack)
CD
1
Insert a disc into the disc loading slot with the label side up.
To eject a disc, stop playback first then press
USB devices (including Android™)/iPod
1
Open the USB port cover.
2
Plug in the USB device/iPod using an appropriate cable.
NOTE
To automatically switch to [USB] source when a USB device/iPod is connected to the unit, set [USB
AUTO] to [ON] in the SYSTEM settings (page 23).
CAUTION
Use an optional Pioneer USB cable (CD-U50E) to connect the USB device as any device connected
directly to the unit will protrude out from the unit, which could be dangerous.
Before removing the device, stop playback.
AOA connections
For details on AOA connection, see page 16.
MTP connection
A device installed with Android OS 4.0 or later can be connected to the unit via MTP, using the cable
supplied with the device. However, depending on the connected device and the numbers of the files in
the device, audio files/songs may not be able to be played back via MTP. Note that MTP connection is
not compatible with WAV file formats and FLAC file formats, and cannot be used with the MIXTRAX
function.
NOTE
If you use an MTP connection, [ANDROID WIRED] needs to be set to [MEMORY] in the SYSTEM settings
(page 23).
AUX
1
Insert the stereo mini plug into the AUX input jack.
2
Press SRC/OFF to select [AUX] as the source.
NOTE
If [AUX] is set to [OFF] in the SYSTEM settings, [AUX] cannot be selected as a source (page 22).
Operations
You can make various adjustments in the FUNCTION settings (page 19).
Note that the following operations do not work for an AUX device. To operate an AUX
device, use the device itself.
.