Table of Contents
Advertisement
10
Operating instructions
Switching the Power Boost on and off
Power Boost makes more power available to the induction cooking zones. Power Boost is
activated for 10 minutes at most. After that the induction cooking zone automatically
switches back to previous heat setting or the highest one.
To switch on, touch
the circle changes.
To switch off, touch a heat setting 1-14.
Power management
The power management divides the power
between two cooking zones in a pair (see the
figure). Power Boost increases the power to
the maximum level for one cooking zone in
the pair and automatically decreases in the
second cooking zone to a lower power level.
The display for the reduced zone alternates.
Using the Timer
There are 3 timer functions: Automatic Counter , Power-off timer and Minute Minder . To
select the timer function touch
tion comes on.
Automatic Counter
Use this function to monitor how long the cooking zone operates. It starts automatically
and comes on below heat setting in the cooking zone on the display.
• To reset the Automatic Counter , touch
the cooking zone from the list with arrows and touch OK to confirm.
Power-off timer
Use the Power-off timer to set how long the cooking zone operates for one cooking session.
Touch
twice to get the Power-off timer . Then select the cooking zone from the list with
arrows and touch OK to confirm. Set the time with arrows. When the time elapses, the
zone switches itself off.
• Stopping the sound: touch
Minute Minder
Touch
three times to get the Minute Minder . Set the time with arrows. The Minute
Minder indicator comes on. When the time elapses, the sound operates.
STOP+GO
The
function sets all cooking zones that operate to Keep Warm setting.
locks the control bars.
• Touch
zone. When no zones are active, the display shows the message which tells the feature.
.
in the circle comes on. As the zone gets hotter, the colour of
to start this function. The symbol II comes on in the circle of the active cooking
again and again until the indicator of a necessary func-
to get the Automatic Counter
. Then select
Advertisement
Table of Contents
