Panasonic KX-TG7653AZ Operating Instructions Manual page 18

Link to Cell
To change the handset ringer tone for a
cellular line, see page 31.
Auto connection to the
cellular phone
After registration, your cellular phone is
connected to the base unit. If you move
the cellular phone out of base unit
range, the cellular phone is
disconnected from the base unit. This
feature allows the base unit to try to
reconnect the cellular phone at regular
intervals when it returns within base unit
range. You can set the interval. The
default setting is "1 min".
Important:
R When you are using a cellular line or
a Bluetooth headset, the base unit
loses its connection from other
Bluetooth devices (cellular phone or
headset). To automatically resume
the connection to cellular phones,
leave the auto connection on.
R Some cellular phones lose connection
after usage, please check the
specification of your cellular phone for
more details.
1
MMENUN#632
2
MbN: Select the desired setting.
3
MSAVEN a MOFFN
Note:
R Some cellular phone may ask you if
you accept the connection
requirement from the base unit. In that
case, select "Off" in step 2. Check
the specification of your cellular
phone.
Connecting/disconnecting the
cellular phone manually
When you make or answer calls with
your cellular phone, we recommend
disconnecting it from the base unit,
18
otherwise received audio may not be
heard on your cellular phone.
You can also manually reconnect the
cellular phone to the base unit without
waiting for the auto connection feature to
resume the connection.
1
MMENUN
2
To connect/disconnect:
For CELL 1: #6251
For CELL 2: #6252
R A long beep sounds.
3
MOFFN
Cellular line only mode (If you
do not use the landline)
If you do not use the landline, we
recommend setting the unit to the
cellular line only mode.
1
MMENUN#157
2
To turn on:
MbN: "On" a MSELECTN a
MbN: "Yes" a MSELECTN
To turn off:
MbN: "Off" a MSELECTN
Note:
R Once you set this mode, you can use
M N or M N instead of MCELLN
(page 21).
R Once you set this mode, the following
features cannot be used:
– Landline features (page 34)
– Answering system (page 47)
– Voice mail features (page 53)
R After this mode is turned on or off, the
base unit reboots.
– Bluetooth connections from cellular
phones or headset are
disconnected. If the auto
connection is turned on (page 18),
the cellular phones are
reconnected.
– will be displayed on the handset
momentarily. The handset can be
used once is displayed.