Sharp LC52LE600E Manual page 20

Table of Contents

Advertisement

<Backlight BLOCK: LC-32LE600E/RU/S>
Is either of fluorescence LEDs off?
Are all fluorescent LEDs on?
Is REG3.3V supplied to pin(1) of CN7603(Driver_sub_PCB)
when the power switch is turned on?
Is UR13V supplied from pins(1-4) of connector CN7003 (PD)
when the power switch is turned on?
Is the STB_ON/OFF signal supplied from pin(8) of CN7008 (LB)?
Is each control signal of CN7008(LB) normally function?
Pin(7) OFL (PWM light control signal input)
Pin(6) ERR (Error output)
Is [LAMP_ERROR] indicated with [5] in a process mode?
Is BL_ON output to pin(2) of CN7603 when the power switch is
turned on?
Is 144V supplied to pins(2,4,6) of CN7007(LA2) and
pins(2,4,6,8,10,12) of CN7006(LA1) when the power switch is
turned on?
Check if the peripheral circuits are short-circuited or parts are
faulty.
U7651, U7502, U7601-7605, Q7501-7509, Q7601-7609
The backlight does not light
NO
YES
YES
YES
YES
YES
YES
YES
YES
YES
Check each fluorescent LED, and change defective parts.
(RUNTKA595WJ01, RUNTKA598WJ01,etc.)
NO
Check each fluorescent LED, and change defective parts.
(RUNTKA595WJ01, RUNTKA598WJ01,etc.)
NO
Check if the peripheral circuits are short-circuited or parts are
faulty. (U7701, U7702, etc ⋅ ⋅ ⋅)
Refer to "No power supply (Front LED does not light up)" and
"No power-up even if turned on (Front LED light up)"
NO
Check the peripheral circuits
(T7002, D7501, L7501, PC7001)
Refer to "No power supply (Front LED does not light up)" and
"No power-up even if turned on (Front LED light up)"
NO
Check the STB signal line on the MAIN_UNIT side (pin(2) of
P7602(LB), pin(D23) of IC3303(VCT_P), etc...)
and the peripheral circuits.
NO
Check each control circuit.
NO
[LAMP_ERROR] is returned to the default value in a process
mode.
Check the peripheral circuits (IC7054, etc ⋅ ⋅ ⋅)
NO
NO
Check if the peripheral circuits are short-circuited or parts are
faulty.
IC7251,PC7004, PC7006, T7501, D7501, C7501, FA5511,etc ⋅ ⋅ ⋅
Refer to "No power supply (Front LED does not light up)" and
"No power-up even if turned on (Front LED light up)"
5 – 3
LC-32/40/46LE600E/RU/S
YES
YES
YES

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lc40le600eLc46le600eLc32le600e

Table of Contents