Table of Contents
Advertisement
LC-32/40/46LE600E/RU/S
9. Video signal adjustment procedure
* The adjustment process mode menu is listed in 5th item.
Signal generator level adjustment check (Adjustment to the specified level)
•
Composite signal PAL/SECAM
•
PC (Analog D_sub15pin) signal
•
33K component signal
1. Picture Adjustment
1) Entering the adjustment process mode
Adjustment point
2) TUNER adjustment
Adjustment point
1
Setting
2
Auto adjustment
performance
3) PAL signal adjustment
Adjustment point
1
Setting
2
Auto adjustment
performance
: 0.7Vp-p ± 0.02Vp-p (White level from pedestal)
: 0.7Vp-p ± 0.02Vp-p (White level from pedestal)
: Y level 0.7Vp-p ± 0.02Vp-p (White level from pedestal)
: PB,PR level 0.7Vp-p ± 0.02Vp-p
Adjustment conditions
Adjustment conditions
[Signal]
PAL split colour Bar
In-house UV
[Terminal]
TUNER
Adjustment process
[VIDEO ADJ] menu page 4/8
Adjustment conditions
[Signal]
PAL full colour Bar
[Terminal]
EXT1 SCART Video input
Adjustment process
[VIDEO ADJ] menu page 5/8
Adjustment procedure
Enter to the adjustment process mode, refering to the 2nd item.
Adjustment procedure
•
Feed the In-house signal (PAL color bar) to TUNER.
•
Make sure the PAL colour bar pattern has the sync level of 7:3 with the pic-
ture level.
•
Feed the SMPTE color bar signal to TUNER.
JABIL: 203.25MHz
[SMPTE pattern]
Bring the cursor on [VIDEO ADJ] and press OK key [*** OK ***] appears when
finished.
Adjustment procedure
•
Feed the PAL full field colour bar (color saturation level 100%) signal to the
SCART video input of EXT1.
[VIDEO input signal]
100% white
Bring the cursor on [VIDEO ADJ] and press OK key [*** OK ***] appears when
finished.
4 – 6
Black
Advertisement
Table of Contents
