Whirlpool HybridCare WED9290FW Installation Instructions Manual page 18

5.
Reverse outer window assembly
Handle
Using a Phillips screwdriver, remove the 4 screws from the
outer window retainer and lift off the trim ring from the window
(A). Rotate trim ring 180° and secure with the 4 screws
removed earlier (B).
18
6.
Rotate and reassemble outer window
assembly to trim ring
Notches
Fig. A
With the edge with 2 notches at the top, align the notches on
the outer window assembly with the tabs on the trim ring and
lower into place as shown in figure A.
Rotate the outer window assembly counterclockwise to lock
tabs into place (figure B). Using a Phillips screwdriver, secure
Handle
with 2 screws removed earlier.
Fig. B IMPORTANT: Do not overtighten.
Bottom
of door
Fig. A
Fig. B