Whirlpool WED9050X Dimensions And Installation

DRYER DIMENSIONS
Front view:
27"
(686 mm)
/
35 3 "
8
(899 mm)
1"
(25 mm)
Back view:
Electric
14"
(358 mm)
NOTE: Most installations require a minimum
5" (102 mm) clearance behind the dryer for
the exhaust vent with elbow. See "Venting
Requirements".
Custom under counter installation (dryer only):
1"
(25 mm)
NOTE: Some models not recommended for
undercounter installation.
PRODUCT MODEL NUMBERS
WED9050X, WED9051Y, WED9150W, WED9151X,
WED9151Y, WED9250W, WED9270X, WED9371Y
Side view:
Closet Installation (stacked washer and dryer):
/
6 1 "
4
(159 mm)
/
28 "
1
8
(715 mm)
/
/
5 1 "
3 1 "
2
2
(140 mm)
(89 mm)
(25 mm)
Cabinet installation (dryer only):
7"
(178 mm)
39" min.
(990 mm)
1"
4"
(25 mm)
(102 mm)

Electric Dryer

29"
(736 mm)
Left or
right side
exhaust
/
3 1 "
2
(89 mm)
/
1
5 "
8
(41 mm)
/
6 7 "
8
(174 mm)
6"
(152 mm)
3"
(76 mm)
71" (310 cm
(1803 mm)
24 in.
(155 cm
3"
(76 mm)
1"
1"
(25 mm)
18"
(460 mm)
(25 mm)
1"
(25 mm)
Door open view:
47 / "
1
8
(1197 mm)
Closet installation (dryer only):
34" recommended
48 in.
2
)
2
2
)
2
4"
(102 mm)
(25 mm)
Spacing for recessed area or closet
installation
All dimensions show recommended spacing
allowed, with tested spacing of 0" (0 mm)
clearance on sides and rear.
■ Additional spacing should be considered
for ease of installation and servicing.
■ Additional clearances might be required
for wall, door, and floor moldings.
■ Additional spacing should be considered
on all sides of the dryer to reduce noise
transfer.
■ For closet installation, with a door,
minimum ventilation openings in the top
and bottom of the door are required.
Louvered doors with equivalent
ventilitation openings are acceptable.
■ Companion appliance spacing should
also be considered.
■ No other fuel-burning appliance may be
1"
installed in the same
closet as the dryer.
48 / "
1
8
(1238 mm)
3"
(76 mm)
(864 mm)
48 in.
2
(310 cm )
2
18" min.
(457 mm)
24 in. 2
(155 cm )
2
3"
(76 mm)
1"
(25 mm)
1"
W10443041B
05/2012