Sprint 1930c Owner's Manual page 12

REPLACING THE BATTERY PACK
To Replace The Handset Battery
Pack Follow The Steps Below:
1. Remove the battery case cover by
pressing on the ridged lines and
sliding downward.
PRESS and SLIDE
DOWNWARD
2. Discard the old battery pack. DonÕt
put the old battery pack in a trash
compactor or a fire - it could burst.
3. Place the new battery pack in its
housing with the metal contacts
facing down.
4. Replace the battery case cover by
sliding the cover upwards.
PLACE THE NEW
BATTERY PACK
INTO THE
BATTERY
COMPARTMENT
PLEASE NOTE THE
CORRECT POSITION
OF THE BATTERY
PACK WHEN
CHANGING BATTERY
5. If the new battery pack is not
already charged, place the hand-
set in the cradle of the base unit
to allow it to charge for 16 hours.
CAUTION:
10
REPLACE THE
BATTERY COVER