For more information on Iridium Antenna Guidelines visit our website at
3) Remove the hexagon locking nut from the base of the antenna.
4) Feed the cable from the antenna through the hole until the antenna sits flush.
5) Feed the hexagonal nut through the cable and tighten on the antenna to hold it firmly in place.
6) Connect the cable to the communications device.
Applications
USRMAN00400 ‐ Antenna Instructions
www.beamcommunications.com
Magnetic Mount Antenna: RST715
The magnetic mount antenna provides a versatile solution that
requires very little installation. The cable supplied is the maximum
specified length to avoid any loss of signal and maintain call quality. It
is not recommended to extend this cable further to avoid loss of dB
beyond the specification.
The antenna should be attached to a metal surface and placed in a
position that provides the greatest line of site to the sky, free of
obstructions.
Bolt Mount Antenna: RST720
The bolt mount antenna is ideal for permanent installations and
enables the antenna system to be securely affixed in location. The cable
supplied is the maximum specified length to avoid any loss of signal and
maintain call quality. It is not recommended to extend this cable further
to avoid loss of dB beyond the specification.
To install the antenna you will need to;
1) Use an existing mounting hole or drill a hole that will enable
the antenna connector to pass through.
2) The hole size should not exceed the size of the hexagonal
locking nut.
Antenna RST715 / 720
INSTALLATION GUIDE