Advertisement
Installation Guide for Beam Magnetic
Single Mode Antenna (RST215)
Applications
Recommended Antenna Installation location
VEHICLE
Antenna Installation is critical for optimum performance of your Iridium service.
Installation Guidelines
To ensure maximum performance of the antenna system and to maximise availability and reliability of service the
antenna must;
•
mount antenna horizontally (top side facing up)
•
have a clear line of site to the sky
•
be clear and free of obstructions
•
be located away from other transmitting devices
•
be securely attached to a flat ferrous surface
•
be located outdoors
•
be installed with a Beam certified cable
Installing Antenna Cables
When installing antenna cables, follow these guidelines:
•
Route and restrain cables to prevent them from vibrating or moving under normal conditions, which could result in
damage to the antenna or the coaxial cable connections.
•
Wherever the cables contact structures, protect the cables from chafing or abrasion. If a cable needs to be bent, avoid
kinking it, and ensure that each bend radius follow the cable specification limits.
Package Contents
Magnetic Single Mode Antenna (includes 5 m / 16.4 ft Cable)
RAIL
For more information please visit: beamcommunications.com
TRUCK
Advertisement
Table of Contents
Related Manuals for Beam RST215
Summary of Contents for Beam RST215
- Page 1 • be located outdoors • be installed with a Beam certified cable Installing Antenna Cables When installing antenna cables, follow these guidelines: • Route and restrain cables to prevent them from vibrating or moving under normal conditions, which could result in damage to the antenna or the coaxial cable connections.
- Page 2 Antenna Installation 1. Choose the appropriate location for the antenna (front or back, depending on the placement of your Beam Iridium terminal or accessory). Recommended location is on a ferrous surface of the vehicle away from roof racks or other antennas, where the antenna can be on a flat and clean surface.
Need help?
Do you have a question about the RST215 and is the answer not in the manual?
Questions and answers