Table of Contents
Advertisement
Before Using Your Wine Cellar
To obtain the best possible results from your wine cellar, it is important that you operate it properly.
IMPORTANT:
Be sure the power on/off switch is in the ON position after cleaning the wine cellar or changing the light tubes.
Power ON/OFF Switch
The power on/off switch is used to turn the power off to the wine cellar when cleaning it or changing the light tubes. The wine
cellar is shipped with the power on/off switch in the on position. To turn the power off, remove the center grille assembly by
grasping the three center louvers, lifting up and pulling outward. Press the power on/off switch to the "Off" position. To turn
the power back on, press the power on/off switch to the "On" position. Replace the center grille assembly by aligning the
hooks in the assembly with the slots in the brackets which are attached to the grille. Push in over the hooks and slide grille
assembly downward.
Showroom Switch
The showroom switch allows electronic controls and interior lights to function independently of the refrigeration system. Your
wine cellar is shipped with the showroom switch in the "Off" position. To use the showroom mode, remove center grille
assembly and turn the showroom switch to the "On" position. Showroom mode will be engaged.
Power
On/Off
Switch
Showroom
Switch
7
Advertisement
Table of Contents
