Vivotek IP32133 User Manual page 11

If the administrator wants to fix the
IP address of the unit, check the
option "Use this
system boots" to
installation procedures. Otherwise
the unit will need
whenever it is restarted.
C lick on "Set IP Address" button to
proceed.
IP whenever
skip future
installation
- 10 -
Enter the wireless LAN settings
according to the access point in
infrastructure or Ad Hoc master.
The connection mode, SSID,
WEP settings are required. If
the settings are not sure at this
stage, click "Skip" to continue
installation in Ethernet. All the
settings can be entered later
from the web configuration
page.
www.vivotek.com
T: 886-2-22404099
F: 886-2-22404097