Summary of Contents for EcoxGear SportBuds BW20 GDI-EXBW200
Page 1
BW20 SportBuds Models: GDI-EXBW200...20 User Guide Control Buttons & Operations On / Off LED Indicator PRESS & HOLD the Multi-Function Button 3 seconds to turn it on. The LED Indicator will flash BLUE. PRESS & HOLD for about 3 seconds, until the LED flashes RED, to turn the SportBuds off.
Page 2
Turn on your smartphone’s Bluetooth. Set the smartphone to Pairing Mode. Available Bluetooth connections shall appear. Select ‘ECOXGEAR’ from the list of discovered devices on your smartphone. Wait a few seconds until the connection is completed. NOTE: Some Bluetooth devices may ask for a password. Enter, ‘0000’...
Page 3
Check if your Bluetooth device is still connected to another device. Disconnect that device. Now reattempt to pair with the SportBuds. LED Indicator Off & ‘ECOXGEAR’ Not Available on Bluetooth Device If the SportBuds have not been used for a long time, the unit may have entered a dormant state.
Page 4
Specifications Unit Weight Charging Time 2 ounces Approximately 1 hour Output Power Optional Accessories For Charging* <100mW AC (5V, 1A) USB Wall Outlet Power Adapter AC (5V, 1A) USB Car Power Adapter Frequency Range 20Hz-20,000Hz Bluetooth Bluetooth® 4.2; Up to 33 ft / 10 m Power Source 3.7V, 80mAh Supported Bluetooth Profiles...
Page 5
Read and follow all instructions. Use only as intended. The ECOXGEAR Bluetooth earphones are intended to be used indoors or outdoors. The earphones have been tested to IPX5 waterproofing standards, which means that they are sweatproof. However, the unit and USB cable are NOT waterproof.
Page 6
2) Never use your ECOXGEAR in a wet environment. 3) Never attempt to fix, repair your ECOXGEAR unit. Please send it back to Grace Digital for any assessments and repairs.
Need help?
Do you have a question about the SportBuds BW20 GDI-EXBW200 and is the answer not in the manual?
Questions and answers