EcoxGear BA80 GDI-EXBA80 User Manual

EcoxGear BA80 GDI-EXBA80 User Manual

Bluetooth earphones

Advertisement

BA80
Models: GDI-EXBA80...89
User Guide
Control Buttons & Operations
On / Off
PRESS & HOLD the Multi-Function Button
6 seconds to turn it on. The LED Indicator will flash
BLUE and RED. PRESS & HOLD
6 seconds, until the LED flashes RED, to turn the
BA80 off.
Bluetooth
When turned on, the BA80 Wireless Audio Adapter
will enter into Bluetooth Pairing Mode and search
for your Bluetooth device to pair and connect.
Refer to Bluetooth Pairing & Audio for details.
Play / Pause / Answer
PRESS
ONCE to pause & play song tracks and
to answer incoming mobile calls & end calls.
PRESS & HOLD
DOUBLE-CLICK
PRESS & HOLD
initiate Voice Dialing.
Volume
PRESS
ONCE to decrease the volume. PRESS
increase the volume.
NOTE: Some Bluetooth devices must be manually set at maximum
audio level.
Track Selection
PRESS
ONCE for previous track selection. PRESS
advance the track selection.
for 2 seconds to reject a call.
to redial your last call.
for 2 seconds while device is on Standby to
for
for about
LED Indicators
ONCE to
ONCE to

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BA80 GDI-EXBA80 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for EcoxGear BA80 GDI-EXBA80

  • Page 1 BA80 Models: GDI-EXBA80...89 User Guide Control Buttons & Operations On / Off LED Indicators PRESS & HOLD the Multi-Function Button 6 seconds to turn it on. The LED Indicator will flash BLUE and RED. PRESS & HOLD for about 6 seconds, until the LED flashes RED, to turn the BA80 off.
  • Page 2: Connecting With Bluetooth

    Turn on your smartphone’s Bluetooth. Set the smartphone to Pairing Mode. Available Bluetooth connections shall appear. Select ‘ECOXGEAR’ from the list of discovered devices on your smartphone. Wait a few seconds until the connection is completed. NOTE: Some Bluetooth devices may ask for a password. Enter, ‘0000’...
  • Page 3: Troubleshooting

    Charge Your BA80 Wireless Audio Adapter The LED indicator will flash RED when the battery is running low. Your BA80 has a micro USB port to connect to the USB cable and charge the unit by connecting it to a USB port on a computer or to an optional USB to wall outlet power adapter (NOT included).
  • Page 4: Specifications

    Specifications Unit Dimensions 1.8” 0.7” 1.2” Unit Weight Charging Options 2 ounces USB to adapter or computer Output Power Charging Time <100mW Approximately 1.5 hours Frequency Range Bluetooth 20Hz-20,000Hz Bluetooth® 4.1; Up to 50 ft / 15 m Power Source Maximum Storage (Battery) Temperature 3.7V, 100mAh 105°F / 40.6°C...
  • Page 5: Fcc Statement

    Read and follow all instructions. Use only as intended. The ECOXGEAR Bluetooth earphones are intended to be used indoors or outdoors. The earphones have been tested to IPX5 waterproofing standards, which means that they are sweatproof. However, the unit and USB cable are NOT waterproof.
  • Page 6: Limited Manufacturer's Warranty

    2) Never use your ECOXGEAR in a wet environment. 3) Never attempt to fix, repair your ECOXGEAR unit. Please send it back to Grace Digital for any assessments and repairs.

This manual is also suitable for:

Ba80 gdi-exba 89

Table of Contents