EcoxGear SportBuds BW50 GDI-EXBW50 User Manual

EcoxGear SportBuds BW50 GDI-EXBW50 User Manual

Bluetooth earphones

Advertisement

BW50 SportBuds
Models: GDI-EXBW50...59
User Guide
Control Buttons & Operations
On / Off
PRESS & HOLD the Multi-Function Button
seconds to turn it on for the first time or to connect to a
new device. The SportBuds will announce, "Power On,
Bluetooth Mode," and the LED Indicator on the right
earphone will flash BLUE and RED. The SportBuds will
enter into Bluetooth Pairing Mode and search for your
Bluetooth device to pair and connect.
Refer to Bluetooth Pairing & Audio for details.
If the SportBuds have previously been paired to your
device, PRESS & HOLD the Multi-Function Button
for 2 seconds to turn it on. The SportBuds will announce,
"Power On," and the LED Indicator will flash BLUE. The
Sportbuds remember the last device paired and will
automatically search for previous connections.
PRESS & HOLD
flashes RED, to turn the SportBuds off.
Play / Pause / Answer
PRESS
ONCE to pause & play song tracks and
to answer incoming mobile calls & end calls.
PRESS & HOLD
Volume / Track Selection
PRESS
ONCE to decrease the volume.
PRESS & HOLD
PRESS
ONCE to increase the volume.
PRESS & HOLD
NOTE: Some Bluetooth devices must be manually set at
maximum audio level.
Your SportBuds will beep to indicate when maximum or
minimum volume setting is reached.
for about 3 seconds, until the LED
for 1 second to reject a call.
for previous track selection.
to advance the track selection.
for 5

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SportBuds BW50 GDI-EXBW50 and is the answer not in the manual?

Questions and answers

Summary of Contents for EcoxGear SportBuds BW50 GDI-EXBW50

  • Page 1 BW50 SportBuds Models: GDI-EXBW50...59 User Guide Control Buttons & Operations On / Off PRESS & HOLD the Multi-Function Button for 5 seconds to turn it on for the first time or to connect to a new device. The SportBuds will announce, “Power On, Bluetooth Mode,”...
  • Page 2: Connecting With Bluetooth

    Turn on your smartphone’s Bluetooth. Set the smartphone to Pairing Mode. Available Bluetooth connections shall appear. Select ‘ECOXGEAR’ from the list of discovered devices on your smartphone. Wait a few seconds until the connection is completed. NOTE: Some Bluetooth devices may ask for a password. Enter, ‘0000’...
  • Page 3 Bluetooth Section within the device currently connected to the SportBuds and delete the ‘ECOXGEAR’ Bluetooth selection from your phone. The SportBuds will then be available to pair & connect to an alternate Bluetooth enabled smartphone / Audio Device.
  • Page 4: Troubleshooting

    Trouble Shooting Bluetooth Pairing and Connection Failure Check if your Bluetooth device is still connected to another device. Disconnect that device. Now reattempt to pair with the SportBuds. Sound is Distorted or Interrupted • There is a barrier between device and SportBuds: Please clear it away.
  • Page 5: Specifications

    Specifications Unit Weight Charging Time 2 ounces Approximately 1 hour Output Power Optional Accessories For Charging* <100mW AC (5V, 1A) USB Wall Outlet Power Adapter AC (5V, 1A) USB Car Power Adapter Frequency Range 20Hz-20,000Hz Bluetooth Bluetooth® 4.2; Up to 33 ft / 10 m Power Source 3.7V, 80mAh Supported Bluetooth Profiles...
  • Page 6 Read and follow all instructions. Use only as intended. The ECOXGEAR Bluetooth earphones are intended to be used indoors or outdoors. The earphones have been tested to IPX6 waterproofing standards, which means that they are sweatproof. However, the unit and USB cable are NOT waterproof.
  • Page 7: Limited Manufacturer's Warranty

    2) Never use your ECOXGEAR in a wet environment. 3) Never attempt to fix, repair your ECOXGEAR unit. Please send it back to Grace Digital for any assessments and repairs.

This manual is also suitable for:

Sportbuds bw50 gdi-exbw59

Table of Contents