Instructions for use
Cancel additional rinse cycle
0
1. Turn programme knob to SHORT SPIN (KORT CENTRIFUG., ESSORAGE
DELICAT).
2. Keep button DELICATES (BEHOEDZAAM, SENSITIVE) depressed for at
least 5 seconds.
Immediately on pressing the button, RINSE+ (SPOELEN+, RINCAGE+)
blinks on the programme cycle display. After 5 seconds RINSE+
(SPOELEN+, RINCAGE+) will stop blinking and lights up constantly for a
further 5 seconds.
3. Whilst RINSE+ is lit up constantly, release the DELICATES (BEHOED-
ZAAM, SENSITIVE) button.
After RINSE+ (SPOELEN+, RINCAGE+) has stopped lighting up, the ad-
ditional rinse cycle is canceled.
With the use of the additional rinse cycle, the water consumption and
3
programme duration increases.
Water cooling
It may be necessary to cool the wash water before pumping out in or-
der to prevent damage to plastics draining pipes.
The wash water is cooled before pumping out at the end of the main
3
wash cycle (by the addition of cold water).
(This setting is only effective for the programme COTTON/LINEN,
EASY-CARE (WITTE/BONTE WAS, BLANC/COULEURS,
KREUKHERSTELLEND, DEFROISSABLE) with a temperature over 40 °C.)
When supplying the appliance, no water cooling is set except for the
additional programme DELICATES (BEHOEDZAAM, SENSITIVE).
Setting water cooling:
0
1. Turn programme knob to SHORT SPIN (KORT CENTRIFUG., ESSORAGE
DELICAT).
2. Keep the PRE WASH (VOORWAS, PRELAV.) button depressed for at least
5 seconds.
After the button has been depressed for 5 seconds, the MAIN WASH
(HOOFDWAS, LAVAGE) will blink on the programme cycle display for 5
seconds.
3. Whilst MAIN WASH (HOOFDWAS, LAVAGE) blinks,
release PRE WASH (VOORWAS, PRELAV.) button.
When the blinking has stopped, the water cooling is set. It remains set
until it is canceled.
44