Water Cooling; Additional Rinse And Water Cooling - AEG ÖKO-LAVAMAT 88840 User Information

Operating Instructions

Water Cooling

It may be necessary to cool down the water before pumping it out in
order to prevent thermal damage to the plastic drainage pipes.
The water is cooled down before pumping out at the end of the main
3
wash cycle (by adding cold water). This setting only works on the
COTTONS/LINEN, EASY-CARES programme when the temperature is
above 40 °C.
When the appliance is supplied water cooling is not set except for the
SENSITIVE programme option.
Setting the water cooling function:
0 1. Turn the programme selector to SHORT SPIN.
2. Press the PRE WASH button for at least 5 seconds. After the button has
been kept pressed for 5 seconds, MAIN WASH flashes on the pro-
gramme progress display for 5 seconds.
3. Release the PRE WASH button while MAIN WASH is flashing. Once it
has stopped flashing, the water cooling function is set. It remains set
until it is cancelled again.
4. If you wish to check whether the water cooling function is set:
– Turn the programme selector to SHORT SPIN.
– Press the PRE WASH button briefly.
When MAIN WASH flashes in the programme progress display, the wa-
ter cooling function is set.
Cancelling the water cooling function:
0 1. Turn the programme selector to SHORT SPIN.
2. Press the PRE WASH button for at least 5 seconds. MAIN WASH flashes
in the programme progress display as soon as the button is pressed. Af-
ter 5 seconds MAIN WASH will stop flashing and remain constantly illu-
minated for 5 seconds.
3. While MAIN WASH is constantly illuminated, release the PRE WASH
button. Once MAIN WASH is no longer illuminated, the water cooling
function has been cancelled.
Water cooling increases water consumption and the programme dura-
3
tion.

Additional Rinse and Water Cooling

You can combine the additional rinse cycle with water cooling. Setting
as for "Additional Rinse" and "Water Cooling".
42