Table of Contents
Advertisement
WG‐500P & WG‐500P M Hotspot in a Printer
3‐2‐1‐2 RADIUS
Item
RADIUS Authentication
Time to Finish/
Accumulation
Primary RADIUS Server
Server IP
Authentication Port
Accounting Port
Figure 3‐2‐4 Authentication Setting Screen
Default
Disable
Disable (RADIUS Disable)
Subscriber can direct access the Internet without entering username
and password.
Enable (RADIUS Authentication)
WG-500P provides "RADIUS Authentication" for service provider to
build up an Internet service with RADIUS server. If RADIUS
Authentication is enabled, all subscribers' authentication will send to
RADIUS Server by RADIUS protocol (RFC 2865, 2866).
Enable
Service provider provides two different accounting calculate for the
Internet service.
Empty
Enter the IP address of RADIUS server.
1812
Enter the authentication port number; the authentication port number
must match with the RADIUS server setting. The allowed numbers
are from 0 to 65535.
1813
Enter the accounting port number; the accounting port number must
Description
35
Advertisement
Table of Contents
