Connecting ZONE B
Connecting a Pre-main Amplifier, etc. (ZONE B)
a
a Analog audio cable
Contents
1.005 mm
LINE
IN
Premain Amp.
OR
Transmitter
Connections
≫
While performing playback through speakers (ZONE A) connected to the unit,
you can enjoy the audio of the same source at the same time with the pre-main
amplifier or the transmitter of the wireless headphones connected to the ZONE
B LINE OUT jack. Use an analog audio cable to connect the ZONE B LINE OUT
jack of this unit and the LINE IN jack of the pre-main amplifier or the transmitter of
the wireless headphones.
For playback, press the
button on the remote controller to display "AV Adjust",
and select the audio output destination. (
Setup
• A setting must be made in order to output the audio to ZONE B. Press
the remote controller to display the Home screen, then set "System Setup" -
"Speaker" - "Configuration" - "Zone 2 Preout" (
59
Front Panel≫ Rear Panel≫ Remote≫
Playback
Setup
≫
≫
p97)
p128) to "Zone B".
≫
on