Advertisement
SECTION 2 |
2.1 LAYOUT
The layout is given at Fig 2.1 below.
102 mm
92 mm
1.
ON/OFF Push Button. Used to switch on and switch off the Inverter.
!
CAUTION!
For switching ON and switching OFF of the Inverter (NTX-1000-12/
NTX-1500-12 / NTX-2000-12/ NTX-3000-12), the ON/OFF Switch on the Inverter
should be in OFF condition.
If the ON/OFF Switch on the Inverter is left in ON position when using the Remote
Control, the following will be observed on pressing the ON/OFF Button on the
Remote Control (1 in Fig 2.1) for switching ON and Switching OFF the Inverter:
• Press ON/OFF Button (1 in Fig 2.1) to switch ON the Inverter: The Remote
Control will display the status of operation of the Inverter
4 | SAMLEX AMERICA INC.
Layout
82 mm
72 mm
Fig. 2.1 Layout
Depth: 35 mm
2
1
Advertisement
