1.
Connecting an External Device
This chapter describes how to connect the projector to an external device and communication conditions.
1.1
Connection interface
The projector can be connected to a PC or other external device using the methods mentioned below.
For information about the connection method supported by the model in use, see the Appendix "Connecting an
External Device".
・Connection using a serial port
・Connection via a network
Connection using a serial port
This method connects a PC and the projector using a serial cable (cross cable).
Connect the serial cable to the PC CONTROL port of the projector. The pin assignment of the serial cable is shown
below.
©NEC Display Solutions, Ltd. 2014-2020
<Connection between the PC CONTROL port (D-SUB 9P) and external device>
Pin number
1
(Not used)
2
RxD
3
TxD
4
(Not used)
5
GND
6
(Not used)
7
RTS
8
CTS
9
(Not used)
Projector
(Not used)
TxD
RxD
(Not used)
GND
(Not used)
CTS
RTS
(Not used)
5
External device