Table of Contents
Advertisement
Connection via a network
Information
・ Before connecting an external device via a network, check with the network administrator.
・ Some models cannot receive commands in standby mode. See Appendix "Standby Mode setting for receiving
commands".
Connection using a wired LAN
This method connects a PC and the projector using a LAN cable. For information about the type of LAN cable to be
used (straight or cross), contact the network administrator. The pin assignment of the LAN port is shown below.
Connection using a wireless LAN
This method connects a PC via a wireless LAN by connecting a wireless LAN unit to the projector. For information
about the available wireless LAN units, see the operation manual of the model in use.
©NEC Display Solutions, Ltd. 2014-2020
<LAN port (RJ-45 8-pin connector)>
Pin number
Function
1
TD+
2
TD-
3
RD+
－
4
－
5
6
RD-
－
7
－
8
Description
Transmit Data (+)
Transmit Data (-)
Receive Data (+)
Not used
Not used
Receive Data (-)
Not used
Not used
6
Advertisement
Table of Contents
