Table of Contents
Advertisement
1.
Connecting an External Device
This chapter describes how to connect the projector to an external device and communication conditions.
1.1
Connection interface
The projector can be connected to a PC or other external device using the methods mentioned below.
For information about the connection method supported by the model in use, see the Appendix "Connecting an
External Device".
・Connection using a serial port
・Connection via a network
Connection using a serial port
This method connects a PC and the projector using a serial cable (cross cable).
Connect the serial cable to the PC CONTROL port of the projector. The pin assignment of the serial cable is shown
below.
<Connection between the PC CONTROL port (D-SUB 9P) and external device>
Pin number
1
(Not used)
2
RxD
3
TxD
4
(Not used)
5
GND
6
(Not used)
7
RTS
8
CTS
9
(Not used)
Projector
(Not used)
TxD
RxD
(Not used)
GND
(Not used)
CTS
RTS
(Not used)
5
External device
Advertisement
Table of Contents
