Setting The Subwoofer; Adjusting The Subwoofer Level; Setting The Subwoofer Phase; Defeat Setting - Alpine iLX-507 Owner's Manual

• When "Bass" and "Treble" are not displayed, touch [Subw.] to
switch to [Tone Adjust] mode.
• Not available when "bass engine" is set.

Setting the Subwoofer

Touch [Tone Adjust].
The "Subwoofer Level" setting screen is displayed.

Adjusting the Subwoofer Level

You can set the Subwoofer level when a Subwoofer is
connected.
Setting item:
Subwoofer Level
Setting contents:
0 to 15 (Initial setting: 0)
Slide the lever left or right to adjust the level.
• This setting is only available when "Subwoofer" is set to [On]
(page 33).

Setting the Subwoofer Phase

The subwoofer output phase is toggled Subwoofer
Normal (0°) or Subwoofer Reverse (180°).
Setting item:
Phase
Setting contents:
0° (Initial setting) / 180°
Touch [Phase] to switch the subwoofer output
phase.
• This setting is only available when "Subwoofer" is set to [On]
(page 33).

Defeat Setting

If Defeat is [On], Media Xpander, EQ Setting and
"bass engine" functions are turned Off. This disables any
settings made for these functions.
Setting item:
Defeat
Touch [Defeat].
The indicator lights up when Defeat is set to On.
35
-EN