Sharp HT-SB31D Operation Manual page 12

Sound bar connections to TVs
Caution:
Turn off all other equipment before making any connections.
Notes:
● To connect to TV/player, use AUDIO IN or OPTICAL IN terminals located at the
rear of the sound bar.
● Refer the operation manual of the equipment to be connected.
● Fully insert the plugs to avoid fuzzy pictures or noises.
● If the TV volume is continuously at low level, the sound bar will automatically
power off. Increase the TV output volume to enjoy the sound from the speaker.
● To avoid desynchronized audio and video when using an external player, con-
nect the output signal from the player to TV and the audio output (from TV) to
the sound bar.
■ Connecting a TV, or DVD player, etc.
If the TV/monitor has an audio or optical output, connect it to the AUDIO IN jack
or OPTICAL IN jack on the rear of the sound bar.
Press the INPUT button repeatedly to select:
Function
OPTICAL IN
AUDIO IN
Bluetooth
TV
or
Blu-Ray/DVD player/
Digital Tuner
Optical digital
audio cable
Sound bar
On/Standby/Input
Indicator
Turns green
Turns cyan
Turns blue
To audio output terminals
To optical
digital audio
output
terminal
To OPTICAL IN
(optical) input
terminal
E-11
Audio cable
(commercially
available)
To AUDIO IN
input terminal