Table of Contents
Advertisement
Changing Other Features
Adjusting the Temperature Display
Note: The setting must be done within the first 10 minutes of connecting electrical power to the water heater.
Table of Setting Items
Item No.
Item
Celsius/Fahrenheit
12
display mode.
Remote Controller
Display
Setting Procedure
1. Turn the water heater off by pressing the Power On/Off Button on the remote controller.
2. Disconnect, then reconnect electrical power to the water heater.
3. Press the Flow Meter Alarm Set Button and hold it in for 2 seconds or more.
4. Press the Flow Meter Alarm Set Button until the remote controller displays item number "12".
5. Press Setting Button " " or "
6. To confirm the setting, turn the water heater on by pressing the Power On/Off Button on the
remote controller.
22
Choices (factory defaults shaded)
°F (Fahrenheit)
°C (Celsius)
" to change the display units to either °F or °C.
Setting Button
Power On/Off Button
Flow Meter Alarm Set buttton
Advertisement
Table of Contents
