ViewSonic ViewPanel VP230mb User Manual page 10

Main Menu Controls
The menu items shown below can be adjusted by using the up
buttons.
Control Explanation
Auto Image Adjust
the video signal to eliminate waviness and distortion.
Press the [2] button to obtain a sharper image.
Auto Image Adjust works with most common video
NOTE:
cards. If this function does not work on your ViewPanel
lower the video refresh rate to 60 Hz and set the resolution to its
pre-set value.
Not available for digital mode.
NOTE:
Contrast/Brightness
the image background (black level) and the foreground (white
level). Brightness adjusts background black level of the screen
image. Press button [2] to toggle between Contrast and
Brightness.
Manual Image Adjust
explained below.
H./V. Position
screen image. You can toggle between Horizontal and Vertical
by pressing button [2]. Horizontal moves the screen image to the
left or to the right. Vertical moves the screen image up and down.
Not available for digital mode.
NOTE:
adjusts the width of the screen image.
H. Size
Not available for digital mode.
NOTE:
Fine Tune
banding, out-of-phase, etc.)
Try Auto Image Adjust first.
NOTE:
Not available for digital mode.
NOTE:
expands and contracts the entire screen image.
Zoom
automatically sizes, centers, and fine tunes
Contrast adjusts the difference between
brings up the Image Adjust controls
adjusts horizontal and vertical position of the
Eliminates any remaining video artifacts (noise,
▲ ▼
and down
, then
®
ViewSonic VP230mb
9