Other Information Specifications ... 14 Troubleshooting... 15 Customer Support ... 16 Cleaning the LCD Display ... 17 Limited Warranty ... 18 Appendix Safety Guidelines ... 19 Compliance Information for U.S.A... 20 CE Conformity for Europe ... 20 07/05/04 A ViewSonic VP231wb...
NERGY Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this mate- rial, or the performance or use of this product.
NOTE: User Guide PDF files and INF/ICM display optimization files. The INF file ensures compatibility with Windows operating systems, and the ICM file (Image Color Matching) ensures accurate on-screen colors. ViewSonic recommends that you install both files. Precautions • Sit at least 18" from your LCD display.
NOTE: Windows users may receive a message asking them to install the INF file. This is on the CD. 4 Insert the ViewSonic Wizard CD into the computer’s CD drive. Follow the on-screen instructions. If your computer does not have a CD-ROM drive, see “Customer Support.”...
You can easily raise and lower the display panel (the head) manually. As you face the front of the display, take hold of each side of the head and pull up or down. The panel should move easily. ViewSonic VP231wb...
Installation of Wall Mount (Optional) To obtain a wall-mounting kit, contact ViewSonic or your local dealer. Refer to the instructions that come with the base mounting kit. To convert your LCD display from a desk-mounted to a wall-mounted display, do the following:...
Power Button Unlock: Press and hold [1] and the down arrow seconds. refresh rate (or vertical frequency; ▲ for 10 seconds. If any ▲ again for 10 seconds. ▼ ▼ again for 10 ViewSonic VP231wb controls ® for 10...
Displays the control screen for the highlighted control. Also toggles between two controls on some screens. Also a shortcut to toggle analog and digital connection. Power light Green = ON Orange = Power ViewSonic VP231wb ® Saving Power On/Off...
Page 10
(The black border around the edge of the screen should barely touch the illuminated "acti ve area" of the LCD display.) ▲ ▼ to scroll up or down the ▲ ▼ or down buttons. ViewSonic VP231wb...
Adds blue to the screen image for cooler white (used Adds red to the screen image for warmer white and Adds green to the screen image for a darker color. ViewSonic ▲ and down ▼ buttons. VP231wb...
Page 12
(video signal input) displays the Manual Image Adjust menu. controls are explained below: moves the screen image left or right. moves the screen image up or down. adjusts the width of the screen image. ViewSonic VP231wb...
Page 13
Language and control screens. maintains the correct video signal proportions allows you to move the PIP window and control displays the menu shown below. controls are explained below: ViewSonic VP231wb...
Page 14
If multiple computers will be connected to the display, allows you to move the on-screen display menus sets the length of time an on-screen display allows you to turn the On-Screen-Display returns adjustments to the original factory ViewSonic VP231wb...
Warning: Do not set the graphics card in your computer to exceed these refresh rates; doing so may result in permanent damage to the LCD display. Macintosh computers older than G3 require a ViewSonic contact ViewSonic. 23" (full 23" viewable diagonal area), TFT (Thin Film Transistor), Active Matrix WUXGA LCD, 0.258 mm pixel pitch...
Loose or broken pins in the cable connector could cause an improper connection. • Connect the LCD display to another computer. • If you have an older graphics card, contact ViewSonic for a non-DDC adapter. Control buttons do not work •...
LCD display screen or case. Some chemical cleaners have been reported to damage the screen and/or case of the LCD display display. ViewSonic will not be liable for damage resulting from use of any ammonia or alcohol-based cleaners.
If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components.
If you have any questions concerning which proper power cord to use, please consult with the dealer from whom you have purchased the product. Switzerland ... SEV Britain ... BASE/BS Japan ... Electric Appliance Control Act Figure A2 Maximum Current Rating of Unit 10 Amps 12 Amps 12 Amps 10 Amps 12 Amps ViewSonic VP231wb...
CE Conformity for Europe The device complies with the requirements of the EEC directive 89/336/EEC as amended by 92/31/EEC and 93/68/EEC Art.5 with regard to “Electromagnetic compatibility,” and 73/23/EEC as amended by 93/68/EEC Art.13 with regard to “Safety.” ViewSonic VP231wb...
Need help?
Do you have a question about the VP231wb and is the answer not in the manual?
Questions and answers