Table of Contents
Advertisement
Gain adjustment
≥ Use the jog dial to change the settings.
A Gain value
≥ In Auto Gain Mode, "AGC" is displayed; in Manual Gain Mode, the gain value is displayed in dB.
B [GAIN]
≥ Switch to Manual Mode.
1
Press the GAIN button to switch to Manual Gain Mode.
≥ The gain value will be displayed in dB.
2
Adjust the gain by rotating the jog dial.
Gain value:
0dB to 30dB
≥ Value closer to 0dB darken the image.
≥ Value closer to 30dB brighten the image.
≥ To return to Auto Gain Mode, press the GAIN button or set this unit to Intelligent Auto Mode using
the iA/MANU switch.
≥ It is not possible to adjust the GAIN in the following situations:
j When a setting in [SCENE MODE] is enabled
j During Freeze Frame
≥ If the gain value is increased, the noise on the screen increases.
≥ In Auto Iris Mode or Auto Shutter Mode, the screen brightness may not change even if you adjust the
gain.
(l
44, 48)
∫ Changing the maximum possible gain value for Auto Gain Mode
Select the menu.
MENU
: [SW SETUP] # [AGC LIMIT] # desired setting
[3 dB]/[6 dB]/[9 dB]/[12 dB]/[15 dB]/[18 dB]/[21 dB]/[24 dB]/[27 dB]/[30 dB]
≥ [AGC LIMIT] is not available when a setting in [SCENE MODE] is enabled.
0dB
(l
33)
(l
63)
- 46 -
1 Jog dial
2 GAIN button
(l
104)
SEL/
PUSH
SET
GAIN
(l
104)
Advertisement
Table of Contents
