Table of Contents
Advertisement
[PEAKING LEVEL]
You can set the peaking strength for Focus Assist.
≥ This function's default setting is "0".
[AREA MODE]
You can set an Area Mode effect.
[INH]/[FOCUS]/[IRIS]/[Y GET]/[FOCUS/IRIS]/[FOCUS/Y GET]
[ZEBRA MODE]
This sets the display duration of the zebra display.
[CONTINUE]:
[MOMENT]:
[BARS TYPE]
You can switch the type of color bars to be displayed when you press the BARS button.
[TYPE 1]
[SUB REC BUTTON]
Enable/disable of the sub recording start/stop button on the handle can be switched.
[ACTIVE]/[INHIBIT]
[SUB ZOOM]
Enable/disable of the sub zoom lever on the handle can be switched. Zoom speed will be different
depending on the setting.
[OFF]/[1]/[2]/[3]/[4]/[5]/[6]/[7]
≥ The larger the value is, the faster the zoom speed becomes, and vice versa.
(l
64)
Displays the zebra display until it is switched to another zebra display setting.
Displays the zebra display for approximately 5 seconds.
(l
41)
[TYPE 2]
- 114 -
(l
72)
[TYPE 3]
Advertisement
Table of Contents
