Table of Contents
Advertisement
CLOSE !# (F11 to F1.9) !# OPEN
≥ Value closer to CLOSE darken the image.
≥ Value closer to OPEN brighten the image.
≥ To return to Auto Iris Mode, press the IRIS button, or set this unit to Intelligent Auto Mode using
the iA/MANU switch.
≥ It is not possible to adjust the iris in the following situations:
j When a setting in [SCENE MODE] is enabled
j During Freeze Frame
≥ Depending on the zoom magnification, there are iris values that are not displayed.
≥ In Auto Gain Mode or Auto Shutter Mode, the screen brightness may not change even if you
adjust the iris.
(l
∫ To enable Backlight Compensation
If you enable [BACKLIGHT] in Auto Iris Mode, automatic iris control will be activated for backlight
compensation, brightening the screen image by preventing subjects from appearing dark when
there is a light source behind them.
≥ Switch to Manual Mode.
Select the menu.
(l
MENU
: [CAMERA SETUP] # [BACKLIGHT]# [ON]
≥
appears when it is set.
≥ It will return to standard Auto Iris Mode (
≥ You can also change the setting using the USER button to which [BACKLIGHT] is registered
(l
60)
This function is registered to the USER2 button by default.
≥ You can also enable [BACKLIGHT] with a USER button in Intelligent Auto Mode.
≥ This function is not available in the following cases:
j When [SCENE MODE] is set to [FIREWORKS]
j During Freeze Frame
(l
63)
46, 48)
(l
33)
27)
(l
63)
(l
104)
) when it is canceled.
(l
104)
- 45 -
(l
44)
Advertisement
Table of Contents
