Table of Contents
Advertisement
Troubleshooting
Note
❒ Slide the cutter one way only, otherwise paper waste may pile up inside
the machine.
D
Rotate the paper roll in the direction of the arrow until you can see the edge
of the paper.
E
Turn the knob anticlockwise about 1/4 to adjust the paper position.
5
F
Slowly rotate the paper roll until the edge of the paper is fed into the rub-
ber part of the roller (A). While feeding the flap of the paper roll into the
rubber part of the roller, turn the paper knob clockwise(B).
68
Advertisement
Table of Contents
