Epcom EPIG7K Manual page 4

DANGER! High voltage may result in death or serious burns!
● Operations on the inverter must be performed by qualified
personnel.
● PV arrays exposed to light may generate dangerous voltage.
● Do not touch the electriferous modules in the PV system while the
inverter is running.
● Carefully read the safety precautions in this manual.
DANGER! Do not touch the contacts or terminals connected to
the grid or the equipment, or it may result in electric shock to
death or outbreak of a fire!
● Do not touch the terminals or conductors connected to the grid
circuit.
● Read and understand all instructions and safety precautions for
grid connection.
● Follow all the safety precautions for low voltage power grid.
DANGER! The damaged device or system fault may result in
electric shock or outbreak of a fire!
● Check if there is damage or other dangerous conditions for the
device before operation.
● Check if the external device and circuit connection are in a safe
state.
● Make sure the device is in a safe state for operating.
WARNING!
● The inverter can be connected to the grid only if it gets permission
from the local electric power department.
● All electrical installations must be made in accordance with national
and local standards and regulations.
WARNING! Operation by non-professional may result in death or
severe burns.
● Only trained electrically qualified persons are permitted to do
electrical operation on this product.
● During maintenance, it is necessary to ensure that at least two staff
members work in the field; the breakers of AC terminal and DC
terminal must be fully disconnected for at least 10 minutes for
internal energy storage components discharging completely, which
should be confirmed with a voltmeter.
~ 3 ~