Table of Contents
Advertisement
40
www.electrolux.com
Remove the three transit bolts.
8.
9. Pull out the plastic spacers.
1st
10. Put the plastic caps in the holes (X3).
You can find these caps in the user
manual bag.
3rd
2nd
A
14.2 Positioning
It is important that your Washer-Dryer
stands firm and leveled on the floor to
ensure correct operation. The appliance
must not be installed behind a lockable
door, a sliding door or a door with a
hinge on the opposite side to avoid
restricting the Washer-Dryer door.
Use a spirit level on the top and side of
the Washer-Dryer to check the levels.
If you do not have a spirit level, as a
guide use the edge of a door frame,
cupboard or bench to check that the
Washer-Dryer is leveled.
Advertisement
Table of Contents
