Positioning; Water Inlet - Electrolux EW 962 F Manual

Table of Contents

Advertisement

p i t tater
wnit
ae
Positioning
Install the machine on a flat hard floor. Make
sure that air circulation around the machine
is not impeded by carpets, rugs etc. Check
that the machine does not touch the wall or
other kitchen units.
Carefully level by screwing the adjustable
feet in or out. Never place cardboard, wood
or similar materials under the machine to
compensate for any unevenness in the floor.
Water Inlet
Connect the water inlet hose to a tap with a
3/4" thread after having inserted the small
filter "A" supplied with the machine.
The inlet hose must not be lengthened. If it
is too short and you do not wish to move the
tap, you will have to purchase a new, longer
hose specially designed for this type of use.
The other end of the inlet hose which
connects to the machine can be turned in
any direction. Simply loosen the fitting, rotate
the hose and retighten the fitting, making
sure there are no water leaks.
ka
SHERMRE
ERS AR
Lo
#t2kO

Advertisement

Table of Contents
loading

Table of Contents