Removing And Installing The Top Rear Cover - Gigabyte G482-Z53 User Manual

3-1

Removing and Installing the Top Rear Cover

Before you remove the top rear cover:
• Make sure the system is not turned on or connected to AC power.
Follow these instructions to remove the top rear cover:
1. Remove the single screw securing the cover.
2. Loosen the two thumbnail screws securing the top rear cover in place.
3. Slide the cover towards the rear and remove the cover in the direction indicated.
4. Follow steps 1-4 in reverse order to re-install the top rear cover.
System Hardware Installation
3
3
1
- 24 -
2
2