Table of Contents
Advertisement
3-1
Removing and Installing the Top Rear Cover
Before you remove the top rear cover:
• Make sure the system is not turned on or connected to AC power.
Follow these instructions to remove the top rear cover:
1.
Remove the two screws on the sides of the top cover.
2.
Unlock the plastic handle and pull the grip handle to open the panel cover.
3.
Slide the cover to the rear of the system and then remove the cover in the direction indicated by the
arrow.
4.
To reinstall the chassis cover reverse steps 1-3.
System Hardware Installation
1
- 24 -
3
2
Advertisement
Table of Contents
