Control Ring / Aperture Ring / Rear Dial - Panasonic LUMIX DMC-LX9 Operating Instructions For Advanced Features

Control ring / Aperture ring / Rear dial

You can use the control ring ( )/Aperture ring ( )/rear dial ( ) to change the settings of
the unit.
• You can adjust the aperture using the aperture ring. Gently turn the aperture ring until it
snaps into place with an audible click. (The aperture can be set between [1.4] and [11].)
(→62, 64, 82)
• Items that can be set by the control ring/rear dial vary depending on recording modes.
Following are the pre-assigned settings.
Mode dial
(→34)
*
1
When Manual Focus is set, the control ring is assigned to focus adjustment.
*
2
The operation is possible only when [Exposure Mode] is set to [S] or [M].
*
3
The operation is possible only when the Scene Guide Mode is set to [Artistic Nightscape].
• You can assign your preferred settings to the control dial/rear dial.
35
*
1
Control ring
Step Zoom (→196)
Step Zoom
Step Zoom
Step Zoom
Step Zoom
Step Zoom
Picture effects change
Step Zoom
Picture effects change
Buttons/Dials/Levers Used for Recording
Shutter speed adjustment
Shutter speed adjustment
Shutter speed adjustment
Shutter speed adjustment
(→76)
Rear dial
—
Programme Shift (→61)
—
(→63)
—
—
(→100)
(→82)
(→36)
Basics
*
2
*
3
SQW0740