Exposure Bracket - Panasonic LUMIX DMC-LX9 Operating Instructions For Advanced Features

Taking Pictures While Adjusting a Setting Automatically (Bracket Recording)
●
Bracket recording is disabled in the following cases.
• In Self Shot Mode
• [Glistening Water]/[Glittering Illuminations]/[Handheld Night Shot]/[Soft Image of a Flower]
(Scene Guide Mode)
• [Rough Monochrome]/[Silky Monochrome]/[Miniature Effect]/[Soft Focus]/[Star Filter]/[Sunshine]
(Creative Control Mode)
• When recording using the flash (except for White Balance Bracket)
• When recording motion pictures
• When recording burst pictures with [Burst Rate] set to [SH]
• When recording 4K photos
• When recording using [Post Focus]
• When [Multi Exp.] is set
• When using [Time Lapse Shot]
• When [Auto Shooting] of [Stop Motion Animation] is set to [ON]

Exposure Bracket

■
About [More settings] (step
[Step]
[Sequence]
[Single Shot Setting]
*
Not available for burst recording. When using burst recording, if you press and hold the shutter
button, recording will be performed continuously until a specified number of pictures are taken.
1st picture
±0 EV
●
When taking pictures using Exposure Bracket after setting the Exposure Compensation value, the
pictures taken are based on the selected Exposure Compensation value.
131
2
in (→130))
Sets the number of pictures to be taken and the exposure compensation
range.
[ ] (Takes three pictures with an interval of 1/3 EV) to [
(Takes seven pictures with an interval of 1 EV)
Sets the order in which pictures are taken.
[ ]: Takes one picture each time you press the shutter button.
*
[ ]: Takes all the pictures set to be taken when you press the shutter
button once.
[Step]: [
2nd picture
], [Sequence]: [0/+/–]
–1/3 EV
4K Photo and Drive Settings
3rd picture
+1/3 EV
]
SQW0740