Panasonic LUMIX DMC-LX9 Operating Instructions For Advanced Features page 202

[Economy]
■
[Sleep Mode]
The camera is automatically turned off if the camera has not been used for the time
selected on the setting.
• To restore → Press the shutter button halfway, or turn the camera [ON/OFF] switch to
■
[Sleep Mode(Wi-Fi)]
The camera is automatically turned off if the camera has not been used for approx.
15 minutes with no Wi-Fi connection.
• To restore → Press the shutter button halfway, or turn the camera [ON/OFF] switch to
■
[Auto Monitor Off]
The monitor is automatically turned off if the camera has not been used for the time
selected on the setting.
• To restore → Press any button or touch the monitor.
●
This function is not available in the following cases:
• During motion picture recording/playback
• When recording with [
• When [Multi Exp.] is set
• When connected to computer/printer
• During Slide Shows
• When using [Time Lapse Shot]
• When [Auto Shooting] of [Stop Motion Animation] is set to [ON]
●
When using the AC adaptor (optional) and DC coupler (optional), [Sleep Mode] or [Sleep
Mode(Wi-Fi)] is disabled.
●
When using the AC adaptor (optional) and DC coupler (optional), [Auto Monitor Off] is fixed to [5
MIN.].
[USB Mode]
Select communication method for when connecting camera to a computer or printer with
USB connection cable (supplied).
[Select on connection]
[PictBridge(PTP)]
[PC]
202
[OFF] and then turn it [ON] again
[OFF] and then turn it [ON] again.
] ([4K Pre-Burst]) of the 4K Photo function
Select communication method each time you connect to a
computer or PictBridge-compatible printer.
Select when connecting to a PictBridge-compatible printer.
Select when connecting to a computer.
Using Menu Functions
Menu list
→ [Setup]
SQW0740