Using The Directlink Mode - Uniden DCX 640 Owner's Manual

Using the DirectLink Mode

To use this feature, you must enter the two handsets
into the DirectLink mode first.
To enter the DirectLink mode, see page 21.
DirectLink call
1) When the phone is in the DirectLink standby
mode, press talk/flash (example of DirectLink from
handset #1).
2) Select the handset to which you wish to DirectLink with
by pressing the number keys (1-4). Your handset will
then page the other handset.
3) On the receiving handset, press talk/flash, or if Any Key
Answer is on, press any number key,
4) When you finish your conversation, press end on either
handset. Return the handset to the cradle, or press
menu/del, and then select/
standby mode (canceling DirectLink mode).
w w w . u n i d e n . c o m
/tone/←, or #/→.
*
to return to normal
E X P A N D I N G Y O U R P H O N E [ 6 7 ]
note
Two handsets can be
in Direct Link mode
while other handsets
are in use.