Table of Contents
Advertisement
Available languages
Available languages
48 TROUBLESHOOTING
TROUBLEShOOTINg
FAQs: Frequently Asked Questions
Q:
When I press a button, why does my dryer beep and then nothing happens?
A:
The Bloqueo de Panel(Control Lock) feature is turned on. To turn off Bloqueo de Panel(Control Lock),
turn the dryer on, then press and hold the button that has *Bloqueo de Panel(Control Lock) on or
under it for 3 seconds.
Q:
Why does my dryer take so long to dry clothes?
A:
Proper airflow is critical to the efficient operation of clothes dryers. A lint filter which is full of lint or
clogged with fabric softener sheet residue can reduce the airflow to the point that the time required
to dry clothing will be greatly increased. Another factor affecting dry time is your home exhaust
system. An exhaust system which is dirty and clogged with lint, or is excessively long, needs to be
professionally cleaned or repaired.
Q:
Why does my dryer start by itself every few minutes?
A:
This is how the Anti Arrugas(Wrinkle Care) feature works. The dryer runs briefly every few minutes for
up to 3 hours after the cycle finishes. This feature is designed to help prevent wrinkles from setting in
when the dryer is not unloaded immediately after the cycle is finished.
Q:
Why does my dryer show 3 minutes when I select the Steam Fresh™ cycle?
A:
When the Steam Fresh™ cycle is selected, the dryer displays the recommended number of garments
for the cycle, not the estimated cycle time, until the cycle is started. Use the Más Tiempo (More
Time) or Menos Tiempo (Less Time) buttons to adjust the load size setting for the number of
garments you desire. For a large load or single bulky item use the
(big) setting.
Advertisement
Table of Contents
