Troubleshooting; Diagnosing Problems - LG TD-H9066 S Series Owner's Manual

TROUBLESHOOTING

The appliance is equipped with an automatic error-monitoring system to detect and diagnose
problems at an early stage. If the appliance does not function properly or does not function at all,
check the following before you call for service:

Diagnosing Problems

Symptoms
Power cord is not properly plugged
in.
Appliance will
not turn on.
House fuse is blown, circuit breaker
has tripped, or power outage has
occurred.
House fuse is blown, circuit breaker
Appliance does
has tripped, or power outage has
not heat.
occurred.
Load is not properly sorted.
Large load of heavy fabrics.
Clothes take too
long to dry.
Appliance controls are not set
properly.
Lint filter needs to be cleaned.
32
Reason
• Make sure that the plug is securely
• Reset circuit breaker or replace fuse.
• Reset circuit breaker or replace fuse.
• Separate heavy items from
• Heavy fabrics take longer to dry
• Use the appropriate control settings
• Remove the lint from the lint filter
Solution
plugged into a grounded outlet
matching the appliance's rating plate.
Do not increase fuse capacity. If the
problem is a circuit overload, have it
corrected by a qualified electrician.
Do not increase fuse capacity. If the
problem is a circuit overload, have it
corrected by a qualified electrician.
lightweight items. Larger and heavier
items take longer to dry. Light items
in a load with heavy items can fool
the sensor because the light items
dry faster.
because they tend to retain more
moisture. To help reduce and
maintain more consistent drying
times for large and heavy fabrics,
separate these items into smaller
loads of a consistent size.
for the type of load you are drying.
Some loads may require an
adjustment of the dry level setting for
proper drying.
before every cycle. With the lint
removed, hold the lint filter up to a
light to see if it is dirty or clogged.
With some loads that produce high
amounts of lint, such as new bath
towels, it may be necessary to pause
the cycle and clean the filter during
the cycle.
EN