LG 32LN510Y.AMT Owner's Manual page 39

Basic image options
Setting
Backlight Adjusts the brightness of
the screen by controlling
the LCD backlight. If you
decrease the brightness
level, the screen
becomes darker and the
power consumption will
be reduced without any
video signal loss.
Contrast Increases or decreases
the gradient of the video
signal. You may use
Contrast when the bright
part of the picture is
saturated.
Brightness Adjusts the base level of
the signal in the picture.
Sharpness
Adjusts the level of
crispness in the edges
between the light and
dark areas of the picture.
The lower the level, the
softer the image.
Colour Adjusts intensity of all
colours.
Tint Adjusts the balance
between red and green
levels.
Colour Choose one of three
Temperature automatic colour
adjustments. Set to warm
to enhance hotter colours
such as red, or set to
cool to see less intense
colours with more blue.
You can control red,
green, blue to adjust
colour details.
Advanced Control Customizes the
advanced options.
reset Restores the options of
each mode to the factory
default.
Advanced image options (depending on model)
description
dynamic Contrast
dynamic Colour
Noise reduction
Gamma
Black Level
Motion Eye Care
Film Mode
Colour Gamut
Edge Enhancer
CUSTOMIZING TV SETTING
Setting description
Adjusts the contrast to
keep it at the best level
according to the brightness
of the screen. The picture is
improved by making bright
parts brighter and dark parts
darker.
Adjusts screen colours so
that they look livelier, richer
and clearer. This feature
enhances hue, saturation
and luminance so that red,
blue and green white look
more vivid.
Reduces screen noise
without compromising video
quality.
You can adjust brightness of
dark area and middle gray
level area of the picture.
» Low: Make the dark and
middle gray level areas
brighter.
» Medium: Express the
original picture level.
» High: Make the dark and
middle gray level area
darker.
Sets black level of the
screen to proper level. This
function is available in the
following modes: RF, AV or
HDMI.
» Low: The reflection of
the screen gets darker.
» High: The reflection of
the screen gets brighter.
Adjusts screen brightness
to prevent eye glare.
Makes video clips recorded
in film look more natural.
This feature operates
only in 480i / 576i / 1080i
Resolution.
Advanced Control
Maximizes the utilization of
colour to increase colour
quality.
Standard: Displays standard
set of colours.
Wide: Increase number of
colours used.
Shows clearer and
distinctive yet natural edges
of the video.
37