Advertisement
1-8
2. How to use
Cleaner description
2-1
1
2
3
4
12
11
2-2
A
ON-OFF pedal
Grasp end of plug (A) and pull to
desired cord length. Plug cor d into
electrical outlet.
To turn cleaner ON, step on ON/OFF
pedal (B) once.
To turn cleaner OFF, step on pedal
again.
Wrap hose over hook (G).
Push hose end (H) firmly onto tube
G
(I) as shown.
H
I
5
6
7
20
8
9
19
10
2-3
B
Cord rewind
Grasp the end of the plug and pull
to release cord from cord reel. After
desired cord length is reached, the
cord will lock into position.
To return cord for storage, hold plug
and press on button (C) at top of
cord reel. To prevent cord from
whipping, hold plug until cord is
rewound.
1. Handle grip
2. Powered hand tool
3. Dirt cup release button
4. Carrying handle/Dirt
13
cup handle
5. Air flow indicator
14
6. Dirt cup assembly
7. Lifetime HEPA filter
15
8. Body cover
9. Nozzle control knob:
16
turn knob to cor rect setting
for height of carpet being
cleaned.
10. Furniture nozzle: helps
17
prevent cleaner from mark-
ing furniture.
11. Cord reel
18
12. Cord rewind button:
press button to rewind cord
for storage. Hold plug until
cord is rewound.
13. Cord hook
14. Hose
15. Hose holder
C
16. Combination tool
17. Crevice wand
18. Hose handle
19. ON/OFF pedal
20. Handle release pedal:
step on pedal to lower handle
to operating or low positions.
Operate cleaner only at
voltage specified on data
plate on back of cleaner.
This cleaner is intended for
household use.
2-4
Transporting cleaner
To move your cleaner from room to
room, put handle in upright position,
tilt cleaner back on rear wheels and
push forward.
5
Advertisement
