Texas Instruments TPS548B28EVM-023 User Manual

Texas Instruments TPS548B28EVM-023 User Manual

Buck converter evaluation module

Advertisement

Quick Links

TPS548B28EVM-023 20-A, Buck Converter Evaluation
This user's guide contains information for the TPS548B28EVM-023 evaluation module (EVM) as well as
for the TPS548B28 DC/DC converter. Also included are the performance specifications, the schematic,
and the list of materials for the TPS548B28EVM.
...................................................................................................................
1
1.1
1.2
1.3
2
2.1
2.2
2.3
1
Safety Warnings
2
3
4
5
1
Input Voltage and Output Current Summary
2
TPS548B28EVM Performance Specification Summary
3
TPS548B28EVM Mode Pin Selection
4
Enable Pin Selection
5
TPS548B28EVM List of Materials
Trademarks
D-CAP3 is a trademark of Texas Instruments.
All other trademarks are the property of their respective owners.
1
Introduction
The TPS548B28 is a D-CAP3™ synchronous buck converter designed for 20 A output current, and the
evaluation module is designed to demonstrate the small printed-circuit-board areas that may be achieved
when designing with the device. The high-side and low-side switching MOSFETs are integrated in the
device package along with their gate drive circuitry. Rated input voltage and output current ranges for the
evaluation module are given in
SNVU662 - June 2020
Submit Documentation Feedback
..........................................................................................................
.........................................................................................................
.................................................................................
............................................................................................................
.....................................................................................................
................................................................................................................
.............................................................................................................
........................................................................................
................................................................................
...............................................................................
...................................................................................
.....................................................................................
........................................................................................................
.........................................................................................
Table
1.
Copyright © 2020, Texas Instruments Incorporated
Contents
............................................................................
List of Figures
List of Tables
.............................................................................
................................................................
TPS548B28EVM-023 20-A, Buck Converter Evaluation Module
User's Guide
SNVU662 - June 2020
Module
1
2
2
3
5
6
7
8
2
9
9
10
10
2
2
4
4
7
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TPS548B28EVM-023 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Texas Instruments TPS548B28EVM-023

  • Page 1: Table Of Contents

    TPS548B28EVM-023 20-A, Buck Converter Evaluation Module This user’s guide contains information for the TPS548B28EVM-023 evaluation module (EVM) as well as for the TPS548B28 DC/DC converter. Also included are the performance specifications, the schematic, and the list of materials for the TPS548B28EVM.
  • Page 2: Introduction

    (without internal Bias) Output voltage setpoint Output current range = 8 V to 14 V Internal LDO Voltage Operating frequency TPS548B28EVM-023 20-A, Buck Converter Evaluation Module SNVU662 – June 2020 Submit Documentation Feedback Copyright © 2020, Texas Instruments Incorporated...
  • Page 3: Modifications

    The value of R6 and R7 for a specific output voltage can be calculated using Equation INTREF FB HS FB LS INTREF = 0.6V INTREF FB_HS = 10kΩ FB_LS SNVU662 – June 2020 TPS548B28EVM-023 20-A, Buck Converter Evaluation Module Submit Documentation Feedback Copyright © 2020, Texas Instruments Incorporated...
  • Page 4 Adjustable UVLO The undervoltage lockout (UVLO) can be adjusted externally using R2 and R9. See the TPS548B28 Data Sheet to get detailed instructions for setting the external UVLO. TPS548B28EVM-023 20-A, Buck Converter Evaluation Module SNVU662 – June 2020 Submit Documentation Feedback...
  • Page 5: Schematic, List Of Materials, And Layout

    Schematic, List of Materials, and Layout This section provides a schematic, a description of the TPS548B28EVM board layout, and layer illustrations. SNVU662 – June 2020 TPS548B28EVM-023 20-A, Buck Converter Evaluation Module Submit Documentation Feedback Copyright © 2020, Texas Instruments Incorporated...
  • Page 6: Schematic

    Schematic, List of Materials, and Layout www.ti.com Schematic The following image illustrates the schematic for the TPS548B28EVM. TPS548B28EVM-023 20-A, Buck Converter Evaluation Module SNVU662 – June 2020 Submit Documentation Feedback Copyright © 2020, Texas Instruments Incorporated...
  • Page 7: List Of Materials

    RES, 243 k, 1%, 0.1 W, AEC-Q200 Grade 0, 0603 CRCW0603243KFKEA Vishay-Dale 4-V to 16-V Input, 20-A Single Synchronous Step-Down Converter, TPS548B28RWWT Texas Instruments RWW0021A (VQFN-HR-21) SNVU662 – June 2020 TPS548B28EVM-023 20-A, Buck Converter Evaluation Module Submit Documentation Feedback Copyright © 2020, Texas Instruments Incorporated...
  • Page 8: Layout

    Critical analog circuits that are noise sensitive are terminated to the quiet analog ground island on the top layer. TPS548B28EVM-023 20-A, Buck Converter Evaluation Module SNVU662 – June 2020 Submit Documentation Feedback...
  • Page 9: Tps548B28Evm Top-Side Layout

    Schematic, List of Materials, and Layout www.ti.com Figure 2. TPS548B28EVM Top-Side Layout Figure 3. TPS548B28EVM Internal Layer-1 Layout SNVU662 – June 2020 TPS548B28EVM-023 20-A, Buck Converter Evaluation Module Submit Documentation Feedback Copyright © 2020, Texas Instruments Incorporated...
  • Page 10: Tps548B28Evm Internal Layer-2 Layout

    Schematic, List of Materials, and Layout www.ti.com Figure 4. TPS548B28EVM Internal Layer-2 Layout Figure 5. TPS548B28EVM Bottom-Side Layout TPS548B28EVM-023 20-A, Buck Converter Evaluation Module SNVU662 – June 2020 Submit Documentation Feedback Copyright © 2020, Texas Instruments Incorporated...
  • Page 11 STANDARD TERMS FOR EVALUATION MODULES Delivery: TI delivers TI evaluation boards, kits, or modules, including any accompanying demonstration software, components, and/or documentation which may be provided together or separately (collectively, an “EVM” or “EVMs”) to the User (“User”) in accordance with the terms set forth herein.
  • Page 12 www.ti.com Regulatory Notices: 3.1 United States 3.1.1 Notice applicable to EVMs not FCC-Approved: FCC NOTICE: This kit is designed to allow product developers to evaluate electronic components, circuitry, or software associated with the kit to determine whether to incorporate such items in a finished product and software developers to write software applications for use with the end product.
  • Page 13 www.ti.com Concernant les EVMs avec antennes détachables Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à...
  • Page 14 www.ti.com EVM Use Restrictions and Warnings: 4.1 EVMS ARE NOT FOR USE IN FUNCTIONAL SAFETY AND/OR SAFETY CRITICAL EVALUATIONS, INCLUDING BUT NOT LIMITED TO EVALUATIONS OF LIFE SUPPORT APPLICATIONS. 4.2 User must read and apply the user guide and other available documentation provided by TI regarding the EVM prior to handling or using the EVM, including without limitation any warning or restriction notices.
  • Page 15 Notwithstanding the foregoing, any judgment may be enforced in any United States or foreign court, and TI may seek injunctive relief in any United States or foreign court. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2019, Texas Instruments Incorporated...
  • Page 16 TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable warranties or warranty disclaimers for TI products. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2020, Texas Instruments Incorporated...

Table of Contents