Table of Contents
Advertisement
ATX/AT Mode Select
(3-pin PWR_JP1)
(see p.8 No. 4)
Panel Power Select (LCD_VCC)
(5-pin PNL_PWR1)
(see p.8 No. 10)
Backlight Power Select
(LCD_BLT_VCC)
(5-pin BKT_PWR1)
(see p.8 No. 11)
Backlight Control Level (CON_LBKLT_CTL)
(3-pin BLT_PWM1)
(see p.8, No. 19)
Digital Input / Output Default Value Setting
(3-pin JGPIO_SET1)
(see p.8, No. 26)
BL1, BL2
(2-pin BL1)
(see p.8, No. 12)
(2-pin BL2)
(see p.8, No. 14)
Battery Power Select
(2-pin PWR_BAT1)
(see p.8, No. 24)
1-2: AT Mode
2-3: ATX Mode
Use this to set up the VDD
power of the LVDS connector.
1-2: LVDD: +3V
2-3: LVDD: +5V
4-5: LVDD: +12V
Use this to set up the backlight
power of the LVDS connector
and the panel backlight power
of BLT_PWM1.
1-2: LCD_BLT_VCC: +5V
2-3: LCD_BLT_VCC: +12V
4-5: LCD_BLT_VCC: DC_IN
1-2: eDP Level
2-3: CH7511B Control
1-2: Pull-High
2-3: Pull-Low
Open: Protect LCD_BLT_VCC
Short: No Protect LCD_BLT_VCC
1
Open: Protect LCD_VCC
Short: No Protect LCD_VCC
Open: Normal
Short: Charge Battery
15
Advertisement
Table of Contents
