Table of Contents
Advertisement
III. Camera Setup & IP CAM Finder
Your network camera can be up and running in just a few minutes. First,
please follow the instructions below for Windows in III-1. Installing & Using IP
CAM Finder to install the IP CAM Finder software and connect your camera to
your wireless network.
Or you can follow III-3. WPS as an alternative method to connect your
network camera to your wireless network.
Then, you can use the web based management interface to watch a live
stream and further configure the camera if you need (see IV.).
Additionally, you can view the camera's live image using either the cloud ID
(see V.), the 16 channel viewer software (see VI.), or the IP CAM smartphone
app (see VII).
III-1.
IP CAM Finder Network Camera Setup
Ensure your computer is connected to the same router as the
network camera.
Windows
1.
Insert the included CD into your CD-ROM drive
2.
Find the "Internet Camera Admin Software" filename
"Setup_Admin_3.0.35_GLP.exe" and execute it
3.
Find the IP CAM IP Address from the "Internet Camera Admin Software"
detail as the figure in below
10
Advertisement
Table of Contents
