Attaching The Monitor To The Base - Acer EI342CKR User Manual

Attaching the monitor to the base

1. Unpack the box. Take out the Styrofoam
side by side and set flat on the desktop.
Lock
3. Press up the quick release button as
illustrated to remove rotary shaft cover.
5. Attach the base of step 4 to the quick
release notch of the LCD monitor securely.
Attaching the monitor on the wall
1. Remove the ori ginal screws x 4 Fig.
from the opening ba ck of the monitor.
3. Connect the monitor onto the wall
Lock
1
Remark:
- Please use only the NO. 2 Screws (35 mm x 4 pcs)
provided with this type of installation.
- Please check monitor weight in advance to choose suitable
load capacity of VESA arm stand.
- Do not discard the original screws as these may be needed
for future use.
2. Take the LCD monitor out of the box
carefully and put it on the side by side
Styrofoam.
4. Tighten the rotary shaft, base and stan
arm with three screws. (There will be one
spare screw left.)
6. Flip the LCD monitor over to make it stan
upright on the desk where it will be used.
(Note: Do NOT press the screen to avoid
damage any time.)
2. Tighten the 4pcs NO.2 screws as Fig
d
d
4
2
2