Table of Contents
Advertisement
Acer LCD Monitor Quick Start Guide (QSG)
Important safety instructions
Please read the following instructions carefully.
1.
To clean the LCD monitor screen:
•
Turn off the LCD monitor and unplug the power cord.
•
Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
2.
Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can
severely damage it.
3.
Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the
display.
4.
Do not remove the cover or attempt to service this unit yourself. An authorized technician should
perform servicing of any nature.
5.
Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD
monitor outside this range may result in permanent damage.
6.
Immediately unplug your monitor and call an authorized technician if any of the following
circumstances occur:
•
Monitor-to-PC signal cable is frayed or damaged.
•
Liquid spills onto the LCD monitor or the monitor is exposed to rain.
•
The LCD monitor or case is damaged.
Attaching the monitor to the base
1.
Place the monitor with the front panel facing downwards on the soft cloth or soft pads on a desk.
2.
Attach the base to the monitor.
3.
Carefully, align and insert the screws provided into the holes under the base.
4.
Use the correct screw driver to tighten the screws.
Connecting your monitor
1.
Connect the power cord to a properly grounded AC outlet.
1.
Remote sensor window
2.
Power button
3.
Power indicator
4.
ETHERNET
5.
Audio out
6.
CVBS / AUDIO IN
7.
SPDIF (Coax)
8.
USB 2
9.
USB 1
10. HDMI 3
11. HDMI 2
12. HDMI 1 (ARC)
Advertisement
Table of Contents
